What You Need to Know Before Installing
The ADA Handle with Flower Backplates is a solid brass cabinet pull that combines traditional style with practical installation. It comes in two sizes: a 111mm option (96mm center-to-center) for smaller drawers or cabinet doors, and a 235mm option (220mm center-to-center) for larger wardrobes or statement applications. Both sizes use the same decorative flower backplate, which not only adds a refined look but also provides extra stability once mounted.
Installation requires only a standard screwdriver. No special tools or drilling templates are included in the supplied information, but the process is straightforward for anyone comfortable with basic hardware mounting.
Installation Steps
Follow these steps to install the ADA Handle with Flower Backplates on your cabinetry.
- 1. Measure and mark the hole positions: For the 111mm handle, the center-to-center distance is 96mm. For the 235mm handle, it is 220mm. Use a ruler to mark the screw hole positions on your drawer or door front, ensuring they are level and aligned with the handle's backplate.
- 2. Drill pilot holes (if needed): If your cabinet front is not pre-drilled, drill small pilot holes at the marked positions. The supplied information does not specify a drill bit size, so choose one slightly smaller than the screws that come with the handle. For pre-drilled cabinets, skip this step.
- 3. Position the handle and backplate: Place the flower backplate over the holes on the outside of the door. Then align the handle's screw holes with the backplate. The backplate's decorative shape will sit flush against the surface.
- 4. Insert and tighten screws from the inside: From the inside of the door or drawer, insert the screws through the holes and into the handle. Tighten them with a standard screwdriver until the handle is secure. Do not overtighten, as this could damage the brass finish or the cabinet material.
- 5. Check alignment and stability: Gently test the handle by pulling it. The flower backplate should remain flat against the surface, and the handle should not wobble. If it feels loose, tighten the screws slightly more.
Product Specifications at a Glance
- ADA Handle with Flower Backplates - Antique Brass: Available in two sizes: 111mm (96mm CC) and 235mm (220mm CC). Choosing the right size ensures proper fit and proportion for your cabinet or drawer. Measure your existing hardware spacing before ordering.

ADA Handle with Flower Backplates - Antique Brass - ADA Handle with Flower Backplates - Antique Brass: Crafted from solid brass with a polished nickel finish. Solid brass construction provides durability for daily use in high-traffic areas like kitchens. The polished nickel finish offers a bright, reflective surface that resists tarnish better than unlacquered brass.
- ADA Handle with Flower Backplates - Antique Brass: The flower backplate adds extra stability and a decorative flourish. The backplate not only enhances the visual appeal but also distributes pulling force across a wider area, reducing stress on the screw holes over time.
Care and Maintenance Tips
The polished nickel finish is designed to withstand daily use while maintaining its shine. To clean, simply wipe with a soft, damp cloth and dry immediately. Avoid abrasive cleaners or scouring pads, as they can scratch the reflective surface. The supplied information does not include specific care intervals or cleaning products, so using a mild soap and water solution is a safe general approach.
If you notice the handle becoming loose over time, retighten the screws with a screwdriver. The flower backplate's design helps keep the handle stable even with regular use.


