Back to Blog
Buying Guides 2026-11-16 Plank Hardware | Decorative details for discerning spaces. 0 views

BLAKE Handle in Satin Brass: Which Cabinet Doors Suit It

BLAKE Handle in Satin Brass: Which Cabinet Doors Suit It

A practical buying guide to the BLAKE satin brass bar handle: which door styles, sizes and finishes it suits, and what to check before you order.

The BLAKE is a bar handle, so start with the door face

The BLAKE Handle is a satin-brushed solid brass bar pull with a minimalist profile. That shape is the first thing to match against your cabinetry: a straight bar reads as a clean horizontal or vertical line on the door, so it works best where the door face itself is calm and uncluttered.

This is a handle-only product, so the look depends on the door underneath it. Before choosing a length, decide whether you want the pull to sit as a short accent or to run along a larger door or drawer front.

BLAKE Handle at a glance

  • BLAKE Handle - Satin Brass: Satin-brushed brass bar handle in solid brass, available in 128mm and 192mm fixing centres (150mm to 220mm overall). The two centre-to-centre options are the main sizing decision; the overall length tells you how much visual line the handle adds to the door.
    BLAKE Handle - Satin Brass
    BLAKE Handle - Satin Brass
  • BLAKE Handle - Satin Brass: The 128mm centres are a standard cabinet drilling; it is also offered at 192mm centres. If your doors are already drilled, the 128mm option is the one to check against existing holes first.
  • BLAKE Handle - Satin Brass: Made from solid brass with a solid, well-weighted bar, it is comfortable to grip. A well-weighted bar matters on larger doors and drawers, where a light pull can feel flimsy in daily use.
  • BLAKE Handle - Satin Brass: The brass is satin-brushed for a classic, warm gold tone, then sealed with a protective lacquer that resists everyday tarnish. The lacquer keeps the satin gold tone consistent, which is useful if you want an even look across a run of cabinets.

Which door styles the BLAKE suits

The BLAKE is described as bringing a minimalist look to kitchens and larger cabinetry. Use that as the filter, not a rule about one door style.

  • Shaker doors: A brass pull for shaker doors works when the bar sits on the flat centre panel or rail without fighting the frame. The straight bar echoes the door's straight lines, so it stays quiet rather than busy.
  • Painted kitchens: Satin brass is a warm gold tone that sits comfortably against painted cabinet fronts. Because the finish is lacquered, the tone stays consistent across a run, which helps in a cabinet handle for painted kitchens where you see many doors at once.
  • Larger cabinetry and tall cupboards: The longer 192mm-centre option is described as well suited to fitting out a kitchen, from base units to drawers and tall cupboards. On a tall door, a longer bar gives the hand more to catch.
  • Drawers: A bar pull on a drawer front gives a clear horizontal line. Choose the length to match the drawer width rather than defaulting to the same size everywhere.

128mm or 192mm centres: choosing the length

The BLAKE comes in two fixing-centre options. The right one depends on the door or drawer front and, if the cabinet is already drilled, on the existing holes.

  • 150mm overall (128mm centres): The shorter option and the one to check first against standard cabinet drilling. It gives a compact bar that suits narrower drawers, base unit doors and tighter runs.
  • 220mm overall (192mm centres): The longer option, described as well suited to fitting out a kitchen from base units to drawers and tall cupboards. Use it where you want a longer visual line and more grip on a larger front.

Satin brass vs antique brass hardware

The BLAKE is satin-brushed brass with a protective lacquer. That gives a warm gold tone that is meant to resist everyday tarnish, so the finish should stay close to how it arrives.

Antique brass is a different look: it is generally chosen for a darker, aged character. If you are weighing satin brass vs antique brass hardware, decide whether you want the consistent warm gold of the BLAKE or the more aged tone of an antique finish. The supplied information for the BLAKE does not describe an aged or patina effect, so do not expect one from this handle.

Checks before you order a brass drawer pull

These are the practical points the supplied product information supports. Anything not covered here is worth confirming with your cabinet maker or fitter before drilling.

  • Measure your existing drilling: If your doors are already drilled, match the 128mm or 192mm fixing centres to the holes. Do not assume a standard spacing without measuring.
  • Decide handle-only vs backplate: The BLAKE is available as a handle only. If you want a backplate behind the pull, that is a separate decision and a separate product.
  • Plan the run, not just one door: On a kitchen you see many handles at once. Choose one length logic for base units, drawers and tall cupboards so the lines stay consistent.
  • Check the finish against your other metals: Satin brass is a warm gold tone. Compare it with your tap, lighting and appliances if you want a coordinated scheme.

Care and what the finish needs

The BLAKE is lacquered to resist everyday tarnish, and the supplied care instruction is simple: wipe clean with a soft, dry cloth. Keep that in mind when cleaning cabinets, and avoid assuming the handle needs a brass polish routine.

The handle is backed by a 5-year mechanical warranty. That covers the mechanism, not a change of mind about the finish, so choose the tone deliberately.

Related Articles

Customer Service
Home
Products
Cart
Profile