Cómo instalar un enchufe doble pintable

By Plank Hardware | Decorative details for discerning spaces. | Published: 2026-10-29

Category: Guías prácticas

Aprende a instalar y pintar un enchufe doble PARKER pintable para conseguir un acabado uniforme o de contraste en tu pared.

Quick answer

Fitting a paintable double plug socket like the PARKER is straightforward: prepare the wall box, wire the socket, then paint the primed plate before or after installation for a finish that blends in or stands out.

Why choose a paintable socket

Standard white sockets can clash with bold wall colors or custom paint jobs. A paintable socket arrives primed in white, ready to accept spray, roller, or brush paint so you can match it exactly to your wall or create a deliberate accent. The PARKER double plug socket uses a slim, low-profile plate that sits nearly flush, making the painted finish look intentional rather than like an afterthought.

Paint before or after installation

You can paint the plate before wiring it in, which is easier for even coverage and avoids getting paint on the wall. Painting after installation lets you blend the edges seamlessly with the surrounding surface. Both approaches work; just ensure the socket face is dry and fully cured before applying power.

Step-by-step fitting guide

1. Turn off the power: Switch off the mains supply at the consumer unit and double-check with a voltage tester that the circuit is dead before touching any wires. Never skip the voltage test — even if the switch is off, a miswired circuit can still carry current.
2. Prepare the wall box and wires: Remove the existing socket and check that the wall box is clean, dry, and deep enough (at least 25mm) to accommodate the PARKER socket. Trim the live, neutral, and earth wires to about 10cm and strip 10mm of insulation from each. If the box is too shallow, the socket may not sit flush — use a deeper box or a spacer plate.
3. Paint the plate (optional but recommended before wiring): Lightly sand the primed surface with fine-grit sandpaper, wipe off dust, then apply two thin coats of your chosen paint. Let each coat dry fully before handling. Avoid thick paint layers — they can chip or prevent the socket from fitting snugly against the wall.
4. Connect the wires: Connect the live (brown) wire to the L terminal, neutral (blue) to N, and earth (green/yellow) to the E terminal. Tighten each screw firmly and give each wire a gentle tug to confirm it's secure. Loose connections cause overheating — always tug-test after tightening.
5. Mount the socket and test: Gently push the wired socket into the wall box, align the screw holes, and tighten the fixing screws evenly. Switch the mains back on and plug in a simple lamp to verify the socket works. If the plate rocks or gaps appear, loosen the screws and re-align before tightening fully — overtightening can crack the plate.

Product used in this guide

PARKER Paintable Double Plug Socket - White: PARKER Paintable Double Plug Socket arrives primed in white, ready to spray, roller or brush. You don't need to sand or prime the plate yourself, saving time and ensuring the paint adheres properly for a durable finish.
PARKER Paintable Double Plug Socket - White