Terug naar blog
Handleidingen 2026-11-20 Plank Hardware | Decorative details for discerning spaces. 0 weergaven

How to Install a FOLD Long Edge Pull Handle on Cabinets

How to Install a FOLD Long Edge Pull Handle on Cabinets

Learn how to fit the FOLD Long Edge Pull Handle on cabinet doors and drawers. This guide covers preparation, fixing, and care for a clean, handle-free look.

What the FOLD Edge Pull Handle Is For

The FOLD Long Edge Pull Handle is a minimalist edge (finger) pull that sits along the top edge of a drawer or door, creating a clean, handle-free look. It is cut from a single solid brass plate with smooth, curved edges and fixes from the back of the front with two concealed screws, leaving nothing on the face. This makes it an excellent choice for lower kitchen drawers and full-height cabinetry in contemporary, minimalist, and handleless kitchens.

FOLD Long Edge Pull Handle at a Glance

  • FOLD Long Edge Pull Handle - Antique Brass: Antique brass edge pull handle in solid brass, 160mm long with 140mm fixing centres. The 140mm fixing centres determine exactly where you drill, so you need to measure and mark accurately before installation.
    FOLD Long Edge Pull Handle - Antique Brass
    FOLD Long Edge Pull Handle - Antique Brass
  • FOLD Long Edge Pull Handle - Antique Brass: Fixed with two screws at 140mm centres. This means you only need to drill two holes per handle, and they must be exactly 140mm apart centre-to-centre.
  • FOLD Long Edge Pull Handle - Antique Brass: Fixed from the back of the front with two concealed screws, leaving nothing on the face. The screws are hidden behind the drawer or door front, so the face remains completely smooth and uninterrupted.

Installation Steps

  1. Measure and mark the fixing centres: The FOLD handle requires two screw holes exactly 140mm apart (centre to centre). Measure from the top edge of the drawer or door to ensure the handle sits flush along the top. Mark both hole positions clearly.
  2. Drill the two screw holes: Drill through the front of the drawer or door at your marked positions. The holes should be sized to accept the screws that come with the handle. Check the screw diameter from the supplied hardware before drilling.
  3. Attach the handle from the back: Position the FOLD edge pull along the top edge of the front, aligning the screw holes with your drilled holes. Insert the two concealed screws from the back of the front and tighten them evenly. Do not overtighten, as this could damage the brass or the cabinet front.
  4. Check alignment and finish: Once fixed, check that the handle sits flush and level along the top edge. The face should be completely free of visible screws or fixings.

Caring for the Antique Brass Finish

The FOLD handle comes in Antique Brass, a darkened, almost-bronze tone warmed with gold, with a brushed surface that catches golden highlights along the edges. A protective lacquer seals the finish to hold that colour. To care for it, simply wipe clean with a soft, dry cloth. Avoid abrasive cleaners or polishes that could damage the lacquer. The handle is backed by a 5-year mechanical warranty.

What the Supplied Information Does Not Cover

The supplied records do not specify the exact screw size or drill bit diameter required. When preparing, check the screws included with your handle and test on a scrap piece before drilling into your cabinet. The records also do not include a template for marking the 140mm centres, so you will need a ruler or tape measure for accurate placement.

Gerelateerde artikelen

Customer Service
Home
Producten
Winkelwagen
Profiel