How to Fit the LOVELL Small Hook for Coats and Bags
By Plank Hardware | Decorative details for discerning spaces. | Published: 2026-11-04
Category: How-to Guides
Fit the burgundy LOVELL small hook securely in hallways, bedrooms, or bathrooms. Follow the step-by-step process, avoid common mistakes, and get placement right.
Quick answer
Fit the LOVELL Small Hook by drilling a hole at your chosen height, inserting the supplied wallplug, and driving the M4 screw through the hook into the plug. Tighten until snug, then test with a light load before hanging coats or bags.
Why the LOVELL hook suits hallways and small spaces
The LOVELL Small Hook has a compact circular silhouette that lines up neatly in a row, making it a good choice for narrow hallway walls or beside a bedroom door. Its burgundy finish adds a warm accent without dominating the space.
Because it holds up to 4kg per hook, it is best for light items such as a single coat, a towel, or a small bag. Overloading it with heavy winter coats or multiple bags can strain the fixing.
Placement tips for a practical hallway hook
Mount the hook at about eye level or slightly lower—typically 1.5 to 1.7 metres from the floor—so adults can reach it comfortably. In a hallway, space hooks at least 15 cm apart if you plan to hang bulky items.
Avoid placing hooks directly behind a door swing or where bags could brush against passing traffic. In bathrooms, keep the hook away from direct shower spray to protect the finish.
Step-by-step fitting guide
- Choose and mark the position: Hold the hook against the wall at your chosen height and mark the screw hole with a pencil. Use a spirit level if fitting a row. Check that the mark is clear and level before drilling.
- Drill the hole: Drill a hole to the diameter and depth recommended for the supplied wallplug. For most solid walls, a 6mm masonry bit is typical, but always match the plug size. Drill slightly deeper than the plug length to avoid bottoming out.
- Insert the wallplug: Push the wallplug into the hole until it is flush with the wall surface. Tap gently with a hammer if needed. Do not force the plug if it feels tight; re-drill with a slightly larger bit.
- Attach the hook: Pass the M4 screw through the hook and drive it into the wallplug using a screwdriver. Tighten until the hook is secure but do not overtighten. Stop turning as soon as the hook feels firm against the wall.
- Test the fixing: Gently pull on the hook to confirm it is firmly anchored. Start by hanging a light item such as a towel or empty bag. If the hook moves or feels loose, remove it and use a larger plug or different fixing.
Product facts
- LOVELL Small Hook - Burgundy: Compact hook with a simple circular silhouette, ideal for coats, towels, and bags, and especially good lined up in a row. Its small size makes it easy to arrange multiple hooks in tight spaces without overcrowding the wall.
LOVELL Small Hook - Burgundy - LOVELL Small Hook - Burgundy: Holds up to 4kg per hook and is supplied with an M4 screw and wallplug. The included fixings are suitable for solid walls, but the 4kg limit means it is not intended for heavy loads.
